 |
 |
 |
I've no idea whether i'm on part 6, 7 or 126648861, but still i'm persevering with the inside of my tailored coat.
This was successful-ish...
I added in extra to all of my lining panels (each edge should taper outwards to at least 0.5cm at the widest parts to allow for movement) but it seemed it was still not enough. The front lining panels had a horrendously tight angle when attaching to the front facings so sadly, i had to unpick and re-cut the front bodice lining. I added in an additional tuck and this seems to have solved the problem.
On the plus side though...the centre back vent looks good!
No comments:
Post a Comment